T/C-600 Specifications


CAT diesel.
Power: 60 hp (44.8 kW) @ 2800 rpm.


Fuel reservoir:
33 gal. (124.9 L).
Hydraulic oil reservoir: 57 gal. (215.8 L).


One double-stage main pump provides 37 gpm (140 Lpm) @ 2150 rpm.
One main lift pump provides 11 gpm (41.6 Lpm) @ 2150 rpm.
Oil cooler: One electric fan forced-air oil cooler mounted on top of engine shroud.
Filtration: One twenty-five micron main filter.


Controls: GOMACO’s control system features forward and reverse steering and grade control and is sensored off the same stringline as the paver. This provides ease of operation and accuracy in texturing and curing.


Two hydraulically powered, gear-driven crawler tracks.
Track length: 11 ft. 7 in. (3.53 m); center-to-center sprocket/idler length, 9 ft. 11 in. (3.02 m).
Track pad width: 11.8 in. (300 mm).
Gearbox reduction: 36.6:1.
Ground pressure: Based on 17,700 lb. (8029 kg) machine with weight evenly distributed, 6.3 psi.
Track speed: Variable up to 97 fpm (29.57 mpm).
Optional two-speed: Low-range track speed of 66 fpm (20.1 mpm) and a high-range track speed of 176 fpm (53.6 mpm) with gearbox reduction at 100:1.
Optional: Poly-track pads.
Optional: Skewable track assembly.


All-steel welded frame, pin-connected main frame sections.
Width: Adjustable from 12 ft. 10 in. (3.91 m) up to 56 ft. 10 in. (17.32 m). Standard width is 32 ft. 10 in. (10 m).
Optional frame extensions: Available in 2 ft. (.61 m), 4 ft. (1.22 m), 8 ft. (2.44 m) and 12 ft. (3.66 m) lengths.
Optional power transition adjuster: Hydraulically adjusts for crown height and permits on-the-go crown adjustments.
Optional: Offset jack mounts, four to allow 2 ft. (.61 m) more between end cars without extending the main frame.


Operator’s platform assembly is standard on both machines.


10 ft. (3.05 m) wide with 5 in. (127 mm) long wire tines spaced to meet specification requirements.
Optional: Wire tine texturing members, fast change and built to specifications.


250 gal. (946.4 L) reservoir, pump with hydraulic motor and controls. Includes spray bar, windshield and work platform.
Optional: 350 gal. (1324.9 L) reservoir.
Optional: Platform assembly for reusable totes provides a quick cure tote exchange.
Optional: Spray bar, windshield and work platform extensions are available in 2 ft. (.61 m), 4 ft. (1.22 m), 8 ft. (2.44 m) and 12 ft. (3.66 m) lengths.


The transport axle is hydraulically powered with 6.7 in. (170 mm) x 15 in. (381 mm) 12 ply tires and removable towing tongue for job-site use only.


Poly-roll attachment is pin-connected for quick attaching to the front of the T/C-600 texture/cure machine and is sectional to match the machine frame. Hydraulically driven variable speed motor, up to 40 rpm, powers the poly-roller to match ground speed. Motor is reversible or can be disconnected to allow roller to free wheel when unrolling. The poly-roller has a minimum length of 14 ft. 9 in. (4.5 m) and can handle up to 500 ft. (152.4 m) of poly-roll depending on thickness and width of poly. Roller extensions may be ordered for different machine widths. Consult factory for different widths, lengths and allowable weight of poly-roll.


Minimum width:
11 ft. 10.32 in. (3.61 m).
Minimum height: 9 ft. 10.26 in. (3 m).

12 ft. 10 in. (3.91 m) up to 56 ft. 10 in. (17.32 m).
Length: 13 ft. 10.6 in. (4.23 m).
Height: 12 ft. 6.73 in. (3.83 m).

WEIGHT (approximate)
(at 32 ft. 10 in. (10 m) standard width)
Basic unit at 17,700 lbs. (8029 kg).



32 ft. 10 in. (10 m) texturing machine only, equipped same as standard machine, less curing system.

32 ft. 10 in. (10 m) curing machine only, equipped same as standard machine, less wire tine texturing member assembly.

Skewed tining option.

Auto-Float® attachment, consult factory for specifications.

Burlap drag assembly available for both texture/cure machines.

Other options are available to customize machines to accommodate applications and customer needs.

Manufactured under one or more of the following U.S. or foreign patents: 5,924,817; 5,941,659; 6,099,204; 6,450,048; CA2,211,331; 7,044,680; 7,284,472; 7,517,171; 7,845,878; 7,850,395; CA2,864,902; CA2,591,177; 8,855,967; 8,682,622; 9,051,696; 9,180,909; 9,200,414; 9,404,228; 9,428,869; 9,458,581; 9,464,716; 9,541,195, 9,624,626; 9,644,328; 9,633,162; 9,670,627; and patents pending.

GOMACO Corporation reserves the right to make improvements in design, material, and/or changes in specifications at any time without notice and without incurring any obligation related to such changes. Performance data is based on averages and may vary from machine to machine.

GOMACO and G+ are registered trademarks of GOMACO Corporation.







For Additional Information


T/C-600 Texture/Cure Machine

T/C-600 Photos

Download The Texture/Cure Brochure (PDF)

Download The GOMACO Full Line Brochure (PDF)

T/C-600 Information In: Deutsch - Español - Francais - Italiano